Performance Data Motor Mount: SAE “D” 4 Bolt Motor: 10.6 Cubic Inch Eaton 76 Series Max Hydraulic Flow: 60 GPM Max Continuous Pressure: 3,500 psi Output Shaft Option: 4” Square Weight: 1,520 lbs (690 Kg) Note: Output speed and torque specifications are based on theoretical 100% values and are provided for comparative purposes only. Pengo continually looks for new ways to improve its products. Therefore, Pengo reserves the right to make changes to our products without notice.
| SA-70 Planetary Drive |
|
| |
|
|
| Reference Torque
Chart |
|
| Pressure (psi) |
Torque (ft/lb) |
|
| 2,000 |
35,069 |
|
| 2,100 |
36,822 |
|
| 2,200 |
38,576 |
|
| 2,300 |
40,329 |
|
| 2,400 |
42,082 |
|
| 2,500 |
43,836 |
|
| 2,600 |
45,589 |
|
| 2,700 |
47,343 |
|
| 2,800 |
49,096 |
|
| 2,900 |
50,850 |
|
| 3,000 |
52,603 |
|
| 3,100 |
54,359 |
|
| 3,200 |
56,110 |
|
| 3,300 |
57,863 |
|
| 3,400 |
59,617 |
|
| 3,500 |
61,370 |
|
| |
|
|
| |
|
|
| |
|
|
| Reference Speed
Chart |
|
| Flow (gpm) |
Speed (rpm) |
|
| 30 |
5.5 |
|
| 40 |
7.3 |
|
| 50 |
9.1 |
|
| 60 |
11.1 |
|
| |
|
|
| Output
speed and torque specifications are based |
| on theoretical 100%
values and are provided |
| for
comparitive purposes only. |
|
| |
|
|
Part No. Description
Mounts
661104 MOUNT LINK ARM & PIN ASSY [CAT 315]
660912 MOUNT, LINK ARM & PIN ASSY [CAT 312]
660913 MOUNT, LINK ARM & PIN ASSY[90A2403]
660926 MOUNT LINK ARM & PIN ASSY ESCO QCK CPLR
660927 MOUNT, LINK ARM & PIN ASSY ROTOLOC 45/55
660933 MOUNT, LINK ARM & PIN ASSY [PC128US-2]
660953 MOUNT, LINK ARM & PIN ASY [CAT320/322-B]
660960 MOUNT, LINK ARM & PIN ASSY KOBELCO
660125 MOUNT, LINK ARM & PIN [KOMATSU PC-50]
661107 MOUNT, LINK ARM & PIN ASSY [DEERE 160LC]
661147 MOUNT, LINK ARM AND PIN [CAT 330-C]
U-Mounts
660546 MNT DRV ASY SNGL PIN NO LNK TO CAT
660732 MOUNT DRIVE ASSEMBLY TO [CAT 426C]
660815 MOUNT, DRV ASSY TO KAMATSU PC-138
660915 MOUNT, DRIVE ASSY TO CAT 311
660934 MOUNT, DRIVE ASSY TO[HITACHI EX230-LC-5]
660973 MOUNT, DRIVE ASSEMBLY 2-1/4 X 6-3/4
660990 MOUNT, DRIVE ASSY TO [KOMATSU PC 60]
661022 MOUNT, DRV ASSY KOBELCO SK-135 ARM END
661064 MOUNT DRIVE ASSY TO CAT 315 [ARM END]
661074 MOUNT, DRIVE TO CASE CX-160 [ARM END]
661078 MOUNT, DRIVE ASSY - HITACHI 2450 [ARM]
661090 MOUNT, KOMATSU PC-220 ARM END
Replacement Parts
660754 O-RING 2-170 N [DIGGA BS170]
660753 O-RINGS [ALL LDS] DIGGA GEARBOXES
660896 SEAL, OIL MDS-8 & 12 [CR 38647]
660602 OUTPUT SEAL [ALL LDS] DIGGA GEARBOXES
661035 RING GEAR S4 ALL RATIOS
660940 FLANGE SHAFT H-200 CAST
660598 GASKET SAE A FLANGE 6 HOLE
700500 GEAR MR SUN [R1:5.77] 20000808
660521 PIN 45MM P317 [24022]
660555 LINK ARM ASSY 45MM SERIES
660714 MOTOR HYD GEARTEK SMDH30 [GT8311]
660603 MOTOR HYDRAULIC WHITE DR-19-SPLINE
661094 MOTOR, HYD JEHYCO 200CC [SPLINED SHAFT]
660793 VALVE SEQUENCE GEARTEK [722877]
660522 VALVE AUGER DRIVE [23882]
660524 BAIL 4K-6K DRIVE UNIT [23816]
660661 BAIL PAINTED LDS-4K-6K
660666 PLANETARY DRIVE KIT [MDT-12K]
661001 KIT PRIMARY GEARSET LDS 6K, 6K5 & 8K5
661033 PRIMARY GEARSET [MDS 8K] GEARBOX
661042 PRIMARY GEARSET (MDT-12K) GEARBOX
661043 SECONDARY RING GEAR (MDT-9K) GEARBOX
661039 SECONDARY GEARSET (MDS-12K) GEARBOX
661053 SECONDARY GEARSET [MDT-25K] GEARBOX
661058 KIT PLANTRY GEARSET & SPLN ADPTR MDT-12K
661059 KIT 3RD GEARST & SPLN ADPTR [MDT-25K] GB
661044 KIT SEAL [MDT-9K] GEARBOXES
661045 KIT SEAL [MDT-12K] GEARBOXES
661050 KIT SEAL [MDT-20K] GEARBOXES
661013 KIT SEAL [SA-70 GEARBOX]
661037 KIT BEARING [MDS-8K & 12K] GEARBOXES
661046 KIT BEARING [MDT-9K & 12K] GEARBOXES
661056 KIT BEARING [MDT-20K & 25K] GEARBOXES
661040 KIT OUTPUT SHAFT [MDT-9K & 12K] GEARBOX
661047 KIT OUTPUT SHAFT [MDT-20K & 25K] GEABOX
Misc.
660713 IN LINE RELIEF ASS'Y (3000 PSI)
660942 IN LINE RELIEF ASS'Y (5000 PSI)
660947 H-250 HEX FLANGE ADAPTER
660949 H-300 HEX FLANGE ADAPTER
660951 S-400 SQ FLANGE ADAPTER
660940 FLANGE SHAFT H-200 CAST
|
