 |
 |
RT-30 Planetary Drive |
 |
|
|
|
RT-30 Planetary Drive
Model/Part #: 610061 |
 |
- Highly Efficient Gearbox
- Two Speed - Auto Shift
- Removable Top Section
- Transducer-Ready Ports
- RevTrak Ready
|
|
|
The new Revolution Series RT-30 is a two speed planetary drive attachment used for drilling or anchor installation. For use with Excavators.
Excavator Size (metric tons) 20T-30T
|
| Model | 610061 | Weight | 1120 lbs. |
|
REFERENCE TORQUE CHART
|
|
Pressure PSI (Bar)
|
High Torque (ft/lbs)
|
Low Torque (ft/lbs)
|
|
1600 (110)
|
16250
|
8125
|
|
1800 (124)
|
18281
|
9140
|
|
2000 (137)
|
20312
|
10156
|
|
2200 (151)
|
22344
|
11171
|
|
2400 (165)
|
24375
|
12187
|
|
2600 (179)
|
26407
|
13203
|
|
2800 (193)
|
28438
|
14218
|
|
3000 (206)
|
30470
|
15234
|
|
REFERENCE SPEED CHART
|
|
Flow GPM (Liter)
|
Low Speed (rpm)
|
High Speed (rpm)
|
|
20 (75)
|
4
|
8
|
|
30 (113)
|
6
|
11
|
|
40 (151)
|
8
|
15
|
|
50 (190)
|
9
|
19
|
TWO SPEED MODELS MUST HAVE A MINIMUM OF 20GPM.
Output speed and torque specifications are NOT listed at 100% efficiency. Maximum efficiencies have been applied to the torque and speed charts according to the manufacturers recommendations. Speed and torque output are dependant on the overall system efficiencies associated with the prime movers hydraulic system. When the purchaser is determining criteria for specific applications please contact Pengo. Pengo has made every attempt to present accurate and suitable information published on this document. This document should be used for information and comparative purposed only. When application specific information is required, please contact Pengo.
|
TOTAL UNIT WEIGHT
|
1120 LBS / 508 Kg
|
|
HYDRAULIC MOTOR INFORMATION
|
|
Displacement
|
13.9 cu/in (227cc)
|
|
Motor Type
|
Two Speed Bi-Directional
|
|
Motor Output Shaft
|
1-1/4" Spline 14T
|
|
Motor Mount
|
SAE - C 4 Bolt
|
|
Motor Ports
|
1-5/8" - 12 UN-2B
|
|
Cross Over Pressure Relief
|
Set @ 3100 psi
|
|
PLANETARY GEARBOX INFORMATION
|
|
Gearbox Type
|
Planetary Three Stage
|
|
Reduction Ratio
|
69.7:1
|
|
Output Shaft
|
4" Square
|
|
Oil Capacity
|
3.1 Gallons
|
|
Oil Type
|
SAE 80W90 GL-5
|
|
Shaft Pull Out (lbs.)
|
60,000 lbs.
|
|
| 610213 | Link Arm 45mm | 660558 | Pin Assembly 45mm |
|
|
|
|
 |
 |
